Structure with aluminium profiles and panels in sturdy galvanised sheet, painted with epoxy powder ensuring high resistance to atmospheric agents and aggressive environments.
Scroll mounted on vibration dampers. Provided with resistance on the housing and thermal safety.
Evaporator and condenser: the coil is made of copper pipes and aluminium fins. Drying filter, Shrader valves, minimum and maximum pressure switch. Defrosting thermostat and solenoid valve in version S.
CONDENSATE COLLECTION TANK
The tank is in non-corrosive stainless steel, the dehumidifier should be connected to a fixed drain, preventing the formation of double siphons. Attach a tube with 3⁄4" F coupling to the welded fitting of the tank.
CONDENSATE LIFTING PUMP (OPTIONAL)
Centrifugal double suction fan, built with sturdy blades in galvanized sheet, statically and dynamically balanced. Protection degree: Three-speed fan.
Standard IP21. On request IP44 (optional).
Enables to use the dehumidifier in environments with temperature up to 3 °C. It is a special hot gas injection system to accelerate the defrosting of the ice formed in the evaporator.
The air supply is supplied as standard on the side opposite to the air inlet, but you may require the dehumidifier in TOP version (with delivery on the top side of the machine).
The air filter, supplied as standard with the unit, is washable and easily replaceable. It is in Polyurethane and High-efficiency filter.
Controls the defrosting cycles, the compressor timer and the alarm card. The dehumidifier is equipped with step sequence control.
CONTROL PANEL AND ELETRICAL CONTROL PANEL
Located in the side area of the machine. IP protection degree. Made in compliance with the European standards 73/23 and 89/336.
Tests are performed to check the tightness of the refrigeration circuit. Electrical discharge tests and functional tests are performed as well.
This dehumidifier meets the essential requirements included in the Directives of the European Community 2006/95/EC of 12 December 2006 on the safety of electrical products for use in Low Voltage; 2004/108/EC of 15 December 2004 in the field of electromagnetic compatibility; 2006/42/EC of 17 May 2006 in the fields of machinery safety. The conformity is declared with reference to the following harmonized technical standards: CEI-EN 60335-2-40, CEI-EN 55014-1, CEI-EN 55014-2. We also declare that the product is manufactured in compliance with the RoHS Directive in force, that is 2002/95/EC, transposed with the Legislative Decree of 25 July 2005 no. 151 (article 5).