The Fral portable professional dehumidifiers of the series ROTOMOULDED are high-performance appliances, equipped with a cover made with high density, impact resistant polyethylene, useful to protect both the dehumidifier and the objects located in the working environment. The tubular handle and two large soft wheels ease handling even in environments with obstacles. They have a high efficiency air filter in polyurethane, washable and easily replaceable, and a very large condensate collection tank with the possibility of direct drain. It is possible to install a condensate lifting pump instead of the collection tank, allowing condensate pumping up to a height of 3.5 meters from the machine positioning level.
The main characteristic of all the Fral professional portable models of the series ROTOMOULDED is the evaporation coil that consists of smooth tubes in aluminium. This unique arrangement derived from professional dehumidifiers allows a lower power consumption of the appliance, with a very high efficiency even at low relative humidity. All models include the defrost timer and Hot Gas defrost.
This single fan air conditioner with Iarge volume air movement from 1,500 m³/hr to 3200 m ³ /hr is i deally suited to cool Iarge office areas, data centres and workspaces. The FACSW (6.7kW or 27.0 kW) split unit has been designed for a fast rental installation and start up.
FACSW is a freestanding unit and can cool specific areas by utilising the three speed fan outlet at front of the unit. Installation literally takes minutes and hoses are supplied in lengths of 5m, 10m, 20m and 30m.
This High-capacity portable air conditioning units, provided with an external unit can be positioned up to 30m away from the central body and equipped with the connecting pipes with glycol fast connection. The FACSW is designed using a self contained chilled water system. The water circulates through a water cooled condenser where the heat is absorbed and then is pumped through the water lines to the outdoor unit where the water is cooled.
The unit has an automatic thermostat, which requlates the local air temperature to the set level required and is capable of operating down to a temperature of 10°C.
The series FR Dehumidifiers are perfect for smaller applications that require hard working humidity control and long term performance reliability. The special design layout that allows very easy access to all of the components for service and installation.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and equipped with a 400mm thick rotor to achieve the best perfomarce possible for a deeper absorption of water molecules ; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
